Швертбот Argie-15. Набор для постройки. for charter

Attractive and versatile boat project Argie 15 can be a lot of fun for the entire family. It can be used under motor, oars, and sails, and spacious enough to be used for long trips on your local lakes and rivers. Simple Assembly technology use of technology "staples+glue" allows you to make a boat with a minimum of tools, no previous shipbuilding experience and a minimum of space. It might be the perfect project for father and son, or a practical winter project to disperse the yearning for warm days. Built as a school project, it can then be used to train young people in the school yacht club. Fitted buoyancy blocks and a simple sailing rig makes it easy to learn, regardless of your age. Argie 15 was designed as a multi-purpose boat for family. Larger in size than a conventional motor-sailing dinghies, it can be used on the oars with an outboard motor up to 10 HP and under sail. Due to its large size, this boat can be used as a tent cruiser - length removable duckboards of 1.95 m, it is enough to put on the tarp or tape the boom to protect from dampness and mini cruiser for the rivers and lakes ready. The selected technology and material (plywood) - can create light and strong design untrained Amateur. Weight of the completed hull is approximately 60kg (if you are using plywood with a specific gravity of 0.6), which makes possible the transportation of a boat on the roof of the car with the use of elongated pillars, but the trailer will be much more comfortable. In comparison with other similar projects the mast is pretty solid and durable. This is done for ease of production with a minimum of joints and the simplification of sailing arms. Disassembled the mast can be stowed in the boat for storage. General design concept - ease of construction and use. For those who want to add something of their own opportunities. This, for example, a footrest, an extra duckboards, special tent etc. In accordance with the drawings she's so great once you can get six standard sheets of plywood. Additional seats along the sides would require one more leaf and slightly decrease the area of sleep, however, will allow a more comfortable sail. This boat has good seaworthiness for its size. These boats are of increased thickness of the boards was built for commercial fishing and as work boats for fishing lobster. (Material from the site - Andrew Popovic (CHAVA) For this cost predlagaetsya a set of 8 sheets of plywood with bulky side banks, as well as the author's project. In the case of priobreteniya project yourself the cost is deducted from the total. Additionally, you can buy svetovoe device (variants with a lifting centerboard or dagger) and the steering device). The surface skins are built, edited, pressed and rolled out on a plane Alexander by Aleksanova Marine Software Integration, Norway. The website of the author of the project DUDLEY DIX YACHT DESIGN